The Autobonder® 2111 features a programmable controller that provides manual and timed modes. Using these modes users can control the dispensing of adhesives and sealants from attached reservoirs and valves. Ideal for medium scale manufacturers, this simple dispensing system provides hassle free dispensing on command.
- Manual Mode: This will give the operator direct control through the use of the foot switch.
- Time Mode: Dispensing continues for specified preset times.
- Control Box Weight = 3.1 Pounds (1.4 kg)
- Control Box Dimensions = 7 3/4” Wide x 4 7/8” Deep x 3” High
- Air Pressure (Maximum) = 100 psi Adjustable
- Foot Pedal = Momentary Contact Plug-In DIN Connect
- Control Box = 100% Solid State Electronics
- Power Supply = Input 120 VAC 60 Hz 12 W Out 12 VDC 500 MA
- Time Range = .01 to 99.99 Seconds
- Control box
- Foot Switch
- Sureshot® Valve
- Needle Kit
Autobonders and Components